YORK LOCK & KEY CO., INC.
                               1554 ALTON ROAD
                           MIAMI BEACH, FL. 33139

                 INSTRUCTIONS FOR SETTING NEW COMBINATION 
                FOR SIMPLEX 100 & 200 SERIES ACCESS CONTROL

STEP 1
        WITH THE DOOR OPEN AND THE LOCK LOCKED, TURN FRONT CONTROL KNOB
        TO THE LEFT, AND RELEASE.  PUSH THE EXISTING COMBINATION AND 
        RELEASE BUTTONS.

STEP 2
        REMOVE THE ACCESS SCREW IN THE REAR OF THE LOCK HOUSING WITH 
        THE ALLEN WRENCH PROVIDED.  INSERT THE WRENCH INTO THE HOLE AND 
        DEPRESS THE BUTTON INSIDE.  REMOVE WRENCH.

STEP 3
        TURN THE FRONT CONTROL KNOB TO THE LEFT, AND RELEASE.

STEP 4
        RECORD YOUR NEW COMBINATION AND PRESS THE BUTTONS IN THE SEQUENCE 
        DESIRED FOR NEW COMBINATION.

        NOTE:   YOU CAN USE ONLY ONE BUTTON OR AS MANY AS FIVE BUTTONS   
                FOR A COMBINATION.  BUTTONS MAY BE PRESSED SIMUTANEOUSLY
                OR SUCCESSIVELY, BUT THE SAME BUTTON CANNOT BE USED MORE 
                THAN ONCE IN THE SAME COMBINATION.

STEP 5 
        TURN THE FRONT CONTROL KNOB TO THE RIGHT, YOUR NEW COMBINATION IS 
        NOW INSTALLED.  
        ***** CHECK COMBINATION THREE (3) TIMES BEFORE CLOSING DOOR *****

STEP 6
        IF FRONT CONTROL KNOB OPENS THE LOCK WITHOUT PUSHING THE 
        COMBINATION, STEPS 3, 4, AND 5 WERE PERFORMED OUT OF ORDER.  TO 
        REINSTALL A COMBINATION, FOLLOW THE ABOVE STEPS BUT OMIT STEP 1.